How do I inflate my ParadisePad SUP Board?

Fasten air hose to the pressure gauge on the pump. Locate the air valve on the tail of the board. Open the valve cover. Make sure the inner valve is in the “UP” position. Connect the air hose to the air valve. Inflate to 10-15 psi. We recommend testing out your board at varying psi to find the right fit for you. Disconnect air hose from the valve. The inner valve will prevent air from escaping when in the “UP” position. Close the valve cover. Generally the pressure gauge will start to register a pressure reading at 7 PSI’s. The board should take about 160-180 pumps to achieve15 PSI

How long should I leave my iSUP inflated?

If your inflatable paddle board is stored inside, out of direct sunlight and away from extreme temperature changes, the board can be left inflated indefinitely. To preserve the life of your isup it is recommended deflating periodically.

How should I store my board?

Deflate your isup by pressing the the valve pin to the down position. It will then lock in this position. Air will naturally leave the board when the valve is in deflate. Roll the board up from the nose to the tail. Once all the air has been removed place the valve in the closed or “ inflate”position, sticking up. This will prevent air from being sucked back into the board. Remove center fin. Secure your board with the belt that comes in the isup package. The deckpad should be on the inside and the fins on the outside. This preserves life of the deckpad. Boards should be stored dry.

What type of paddle comes with this iSUP and does it float?

The iSUP comes with an upgraded fiberglass 3-piece adjustable paddle with nylon composite blade. It breaks down conveniently to fit into the included back pack and will float assembled.

Are the fins included?

Yes, some of the inflatable boards have permanently fixed side fins. One or more removable center fins are included with every SUP.

What is included in a ParadisePad SUP package?

The single person sup's will come with a backpack, dual action high volume hand pump, ankle leash, 3 piece fiberglass paddle, and repair kit.

What PSI do I inflate my Paradise standup paddle to?

Depending on your preference from 12-15 psi. Larger sized people will prefer a higher psi.

What makes the Paradise Stand up paddleboard so firm?

Paradise uses drop stitch fibers that connect the top and bottom layers of military-grade PVC. When inflated the waterpad becomes a hard, stable platform.

Did I hear correctly that Paradisepad broke a Guiness World Record with a multi person paddleboard?

Yes, Paradise Pad broke a Guiness World Record with 73 passengers with their 50' stand up paddleboard! We do offer two sizes of multi- person paddleboards.

Why would I want a electric fin for a paddleboard?

Strong winds pop up and you are struggling to get back home. Turn on the remote and no more fighting the wind. You get a leg cramp and are struglling to stand up. Sit down and turn on the electric fin and no more worries! If sometimes you dont want to go out with faster paddlers as you feel like you are holding them up, just turn on high speed and see if they can keep up with you! Do you want to fish or troll? Turn on low speed and greatly reduce your paddling.

What sizes of multi-person paddleboards do you offer?

Paradise Pad offers two sizes of multi-person paddleboards. Our 12'x5' wide inflatable SUP is ideal for 2-4 people but can also be used by one person. For larger groups of 4-8 people, the 17'x5' option is the best choice. Both options guarantee a great time on the water.

What makes Paradise pad foam pads so much better than other foam floats for boating?

Paradise Pad is proud to say we have been named The premium foam water pad for 6 straight years. Paradise uses denser foam made in the USA with the Best in Class tear resistant membrane between the layers of foam. Most companies will cut corners and use a lower priced plastic tether vs or stainless steel tether and not even use a membrane to stop tearing.

Do you make a Yellow, pink or red paddleboard?

At this time we only make one classic looking style inflatable paddleboard with woodgrain looking eva foam and white drop stitch membrane. We do plan on adding to our offering of paddleboards in the future. Let us know if you feel we should bring on any style like a inflatable kayak, racing paddle board, or any other kind of stand up paddleboard.

What are the advantages of a inflatable paddleboard over a hard sup?

The main benefit of a Isup over a hard paddleboard is that it comes down to transporting and storage. Being able to inflate and deflate your iSUP means you don’t need a car rack, pickup truck to haul the board around. You can take your sup on a airplane trip but good luck walking into a airport with a 12' hard board. iSUPs don’t get damaged easily, so you don’t have to worry about scratches like with a hard board.

I see Paradise Pad offers 5 Models (XS, S, M, L, XL). Why so manyoptionas and which is the best for my family?

The standard water pad in the industry is a 2ply water pad around 1.25” – 1.5” thick, 6’ wide by 12’ or 18’ long. Our thinnest pads (XS and M) are 1.4” thick and are perfect for the family with small kids. Great for the adults too, but not as easy for adults to “walk on water”. If only 4-5 users, the 12’ (XS) is plenty big & will support roughly 900lbs; If more than 4-5 users go with the 18’ (Medium) which will support roughly 1,500lbs of distributed weight (laying/sitting). We have other style options as customers have been asking for more. The next thickest pad is our Large model (6’ x 18’ x 1.5”). This is our original 3ply pad, 3ply means 3 layers of foam, in relation the 2ply is 2 layers of foam. With an additional layer of foam, results in enhanced buoyancy/floating power! This model will support roughly 1,800lbs. If the Large model is appealing but you’re still uncertain if it will be enough flotation then check out our XL. It’s our best pad we offer & have ever made. 6’ x 18’ x 2.1” and will support roughly 3,000lbs. Our fifth model is our Small. Unique in its own class because it is 5’ x 15’ x 2.1” and will support roughly 2,000lbs. By making a foam pad a foot narrower we have made a pad that is easier for transportation & storage – it even fits in the backseat of some cars, whereas 6’ pads cannot fit in a vehicle unless mid sized SUV, van, or truck. This model is recommended for 4-5 users & can be seen on many rental boats across the country.

Was Paradise Pad the first company to make floating foam lake mats?

No, we were not the first company making floating water pads. Our world class engineers had time to study the flaws of others like no tear resistant membrane, low density foam, plastic tethers, no bungee cords, no customer service or warranty, & most are made in China. We didn’t want to make the same mistakes like others. Some other firsts have been the Hindenberg, Titanic, Blackberry, etc. It is just an example being a first isn’t always the best.

Are Paradise Pad's water pads made in the USA?

YES, PROUDLY. The ParadisePad family business is based in the Midwest and is very proud to say our manufacturing process and foam are all made in the USA. We could save a lot of money buying a second rate water pad made in China but we felt we couldn’t mislead our American friends like some other foam water pad companies. American foam > imported foam.

Where do I put my Paradise Pad when my boat is full of people?

Most people feel their ParadisePad is the best lay toy to bring boating but all foam floating pads take up a lot of space. When boating, most will lay their ParadisePad on the swim platform or on the front of a pontoon boat.

How do I anchor my Paradise Pad floating foam lake mat?

Paradise Pads come with a superior stainless steel tether on each side of the pad and a 10’-15’ bungee cord with carabiner clips at each end. Attach one end of the bungee to the pad and the other end to the boat, jetski, dock, anchor etc.!

How can I extend the lifespan of my Paradise Pad?

Paradise Pad uses high-quality American-made foam with UV screeners. However, UV rays can still be harmful. We recommend keeping the water pad out of direct sunlight when not in use and avoiding prolonged exposure to the sun on land or water.

What is the warranty on my foam Paradise Pad?

We offer the easiest and best 1 year warranty in the industry. Many other brands make you get a return goods form and then you need to pay around $150 to ship the item back to see if they will warranty. We feel this is unfair. Most other brands limit the warranty and do not cover tears from jumping on the pad. We ask that you email us your proof of purchase, picture of the problem and we take it from there…

Do you still manufacture folding foam floating mats?

We have discontinued the production of folding mats as they did not perform as expected. They lacked the buoyancy of a standard foam pad, took up a lot of space on the boat, and required significant time to assemble. For a more compact and buoyant option, consider our lineup of inflatable pads, which fit under a boat seat and offer superior buoyancy.

What kind of foam do you use for your foam pads

We manufacture our foam pads with marine grade Cross-Linked Polyethene foam made in the USA that is soft and smooth to the skin vs many other competitors foam mats.

Where should I store my foam lake mat when not in use?

We recommend that you store your foam lake pad not directly exposed to the sun. UV rays can be harmful to all plastic items. Exposing your foam water pad to the sun 24 hours a day, 7 days a week will affect its life expectancy.

What air pressure should I put in my inflatable pad?

Paradise recommends around 3-5 psi with the water pads, 4-6 psi with the Splash Island and Splash pad, yoga mat around 5-7 psi.

Do you recommend a electric pump to fill up the inflatable pads from the boat?

Would you rather enjoy a drink or hand pump a pad? The 12v electric pump will give you all the pressure you will need but it takes longer than the 120v pump. If you are inflatating from the boat go with a 12v electric pump and make your life easier.

Can I leave my Paradise Splash Island in the water for extended time periods?

Sure but anything left in the water may see algae growth. If this happens, flip over your party pad and wipe with a rag. Make sure to anchor properly and we do suggest using 1-2 lines to the water pad.

What is the best way to clean my Paradise inflatable party pad?

Basic cleaning supplies and a rag are usually sufficient for cleaning. For tougher scuffs, a magic eraser works exceptionally well.

Can I use my Paradise inflatable dock in the ocean?

Sure thing. If at all possible rinse off with fresh water after use.

Can my Splash island, Splash pad or any other inflatable pad be towed?

We do not recommend towing the pads behind your boat. The drings are strong but are not designed for towing.

What is the weight capacity of my inflatable mat?

We normally say, if there is room for you to sit or lay down, it will hold the extra weight. We have seen pictures of 15 adults on inflatable pads. The buoyancy of a inflatable pad is much better than foam water pads.

Are the Paradise Pad inflatable mats, Splash Islands and Splash pads durable?

These inflatable pads are made with the same PVC construction and drop-stitch technology seen in our Guiness World Record paddleboard. Many other brands of inflatable docks are easily punctured and made out of thinner or lower grade products. You will be astonished on how buoyant, rigid and sturdy they are!

Does Paradise Pad have a inflatable jet ski dock?

Yes, It is more like a portable or temporary jet ski dock and/or floating mat. Dock your seadoo have another 6.5'x5' area to relax and hang out. Great to keep your jet ski from banging into your boats or docks.

We always take our Paradise party cove island ( Splash Pad) to the local party cove. We normally fill with a hand pump when we get tie up the boat. Is this the best way?

We strongly suggest that you get a 12v pump and inflate the pad in party cove. We do supply a hand pump with each pad purchased but it does take longer and way more work.

Comparision of Electric Paddle board Fin Motors

Hayden

Jul 10

3 min read

Updated: Sep 6

The Spec Breakdown: Power, Weight, and Price of Electric Paddle Board Fin Motors

To properly compare electric Paddle board fin motors, we need to balance motor wattage, total battery capacity, deck weight, and overall value.

To find the true energy capacity, we use the formula:

Wh=Voltage (V)×Amp-hours (Ah)

Feature	ParadisePad Silver Efin	Ledonne EP18LT
Price	$550	$499
Motor Power	450 W	160 W
Battery Specs	36V, 13Ah	25.6V, 10Ah (approx.)
Total Energy	468 Wh	~256 Wh
Battery Weight	7.6 lbs	8.7 lbs (3.95 kg)
Top Speed	5.5–7 mph	~4.5–5 mph (8 km/h)
Energy Density (Wh / lb)	61.6 Wh/lb	29.4 Wh/lb
Power-to-Weight (W / lb)	59.2 W/lb	18.4 W/lb
Value ($ / Wh)	$1.18 / Wh	$1.95 / Wh

Direct Comparison Analysis

Energy Capacity & Deck Weight: For a $51 difference, the ParadisePad Silver Efin provides nearly double the total power capacity (468 Wh vs. 256 Wh) while shedding 1.1 lbs off your board's deck. The Ledonne's battery pack results in an energy density of 29.4 Wh/lb compared to the Silver Efin's 61.6 Wh/lb.
Thrust & Speed Performance: The ParadisePad delivers nearly triple the motor wattage (450W vs. 160W), yielding a 59.2 W/lb power-to-weight ratio compared to the Ledonne's 18.4 W/lb. This translates to higher top speeds and stronger resistance when paddling against currents and headwinds.
True Economic Value: The ParadisePad Silver Efin operates at $1.18 per Watt-hour stored compared to $1.95 per Watt-hour on the Ledonne EP18LT, delivering a better return on investment across every metric.

Verdict: With only $51 separating these two options, the ParadisePad Silver Efin completely outclasses the Ledonne EP18LT—offering nearly triple the propulsion thrust, double the energy runtime, faster top speeds, and lower overall deck weight.

Deep Dive: Blog Takeaway & Recommendation Guide

Top rated and Amazon choice electric paddle board fin motor — Paradisepad 450 watt motor with 13ah 36 volt battery

1. ParadisePad Silver Efin (450W / 13Ah) — $550

This is the undisputed powerhouse of the lineup. If your readers are adventure tourers, paddleboard fishers carrying heavy gear, or anyone dealing with aggressive coastal tides, this is the top-tier recommendation after doing our comparision of electric paddle board fin and motors. Named the "Best Bang For The Buck by Best Review"

The Power Advantage: The 450W motor delivers significantly higher torque, allowing you to hit speeds of 5.5 to 7 mph and push through strong headwinds where weaker motors bog down.
The Range King: At 468 Wh, it has nearly double the battery capacity of the Ledonne. You can expect up to 1.5–2 hours at wide-open throttle, or up to 10 hours in eco-mode.
The Weight Dynamic: Packing this much massive capacity into just 7.6 lbs offers incredible energy density for the amount of power it pushes.

paradisePad ultimate electric paddle board and kayak fin motor. top rated for paddleboarders — ParadisePad 450 watt motor

2. Ledonne EP18LT (160W / 25.6V) — $498.00

The Ledonne operates on an entirely different tier. It shouldn't be viewed as a "jet engine" for your board, but rather as an e-bike style pedal assist.

Gentle Assistance: At 160W, it's designed to take the bite out of paddling fatigue rather than doing all the heavy lifting. It's excellent for seniors, beginners, or calm lake cruising.
The Weight Surprise: At 8.7 lbs, the Ledonne battery is actually the heaviest of the three despite having the lowest motor power. This means you carry more weight on deck for less overall speed.
The Pricing Problem: At $499, it sits only $50 cheaper than the ParadisePad Efin, despite offering less than half the motor wattage and a heavier battery footprint.

paradisepad offers the best option for paddleboarders. Top google search and amazon top pick — Ledonne 160 watt motor with 10ah 25.6 volt battery

The Ultimate Dealbreaker: Company Location & Spare Parts

When choosing a motorized fin, where the company is located and how they handle support is just as important as the specs.

ParadisePad: USA Family-Based Company

Who they are: ParadisePad is a family-owned and operated watersports company based right here in the USA since 2015
Support & Spare Parts: Because they are domestic and deeply rooted in the boating community, they actively stock spare parts. If you lose a remote, damage a prop, or need a replacement component down the line, you can actually get a hold of them to fix your investment rather than throwing it away.

Ledonne: China-Based Company

Who they are: Ledonne is a company based in China. While they sell globally through third-party platforms, their infrastructure is entirely overseas.
The Risk Factor: Ledonne does not mention anything about getting spare parts. If a proprietary component breaks outside of a basic return window, your $499 investment risks becoming a paperweight because tracking down replacement parts from an overseas generic manufacturer is notoriously difficult.

Blog Takeaway & Recommendation Guide

Best Overall & Long Range: ParadisePad Silver Efin (450W/13ah - $550) — Unmatched power, a top speed up to 7 mph, and robust battery life for serious paddlers who refuse to get stranded by strong tides.

Comparision of Electric Paddle board Fin Motors

The Spec Breakdown: Power, Weight, and Price of Electric Paddle Board Fin Motors

Deep Dive: Blog Takeaway & Recommendation Guide

1. ParadisePad Silver Efin (450W / 13Ah) — $550

2. Ledonne EP18LT (160W / 25.6V) — $498.00

The Ultimate Dealbreaker: Company Location & Spare Parts

ParadisePad: USA Family-Based Company

Ledonne: China-Based Company

Blog Takeaway & Recommendation Guide

Recent Posts

Comments

CONTACT

MORE INFO